- -€107.00
- Save €107.00
W403 - Japanese Wc-bidet cover
€199.99
€306.99
Tax included
Cover-bidet with Japanese toilet seat.
- • Water jet cleaning.
- • Temperature indicator panel.
- • Remote control and side button panel.
- • Automatic functions.
- • Compatible with different toilet models.
(Toilet not included)
FREE SHIPPING IN PENINSULA IN 24H - 48H.
VOGO's W-series bidet covers turn any traditional toilet into a Japanese-style toilet with flushing, drying and many automatic functions:
- · Compatible seat depending on model.
- · Display indicator.
- · IPX4 waterproof.
TECHNICAL CHARACTERISTICS:
- · White colour with temperature indicator panel.
- · Dimensions: 51 × 37 × 13 cm
- · Features:Heated seat, water jet hygiene system, air drying, soft cover closing, ultraviolet light (anti-bacterial), self-cleaning nozzle, ECO mode, temperature and pressure parameter adjustment.
- · Remote control: Remote control and via the built-in digital panel.
- · Easy installation.
- · Required pressure: 1 bar
ACCESSORIES INCLUDED:
.png)
PACKAGING:
- Cardboard box: 425x173x550mm.
- Interior protected in foam.
Data sheet
- Color
- White
- Serie del producto
- Serie clásicos
- Nombre del producto
- SL600
Specific References
Model
W430
Characteristics
- Front cleaning
- Rear cleaning
- Hot air drying
- Seat sensor
- Heated seat
- Remote controlled self-cleaning nozzle
- Soft-close cushioning
- Night light
- ECO mode
- Automatic mode
- IPX4 Waterproof
Adjustments
- Cleaning nozzle position adjustment
- Water temperature adjustment - 4 levels (Up to 40ºC)
- Drying temperature adjustment - 4 levels (Up to 55ºC)
- Seat temperature adjustment - 4 levels (Up to 40ºC)
Dimensions
51 × 37 × 13 cm (length x width x height)
Voltage
220V/110V - 50/60Hz
Color
White
Material
Polypropylene (PP)
The Japanese seat covers with integrated bidet are compatible with the following toilets:
- Toilet with oval tank: Depends on the model..
- Toilet with round tank: Dependes on the model.
- Toilet with square tank: Not compatible.
Two basic elements are required to install the smart cover:
- • A mains water supply, which must have a pressure equal to or greater than 1 bar.
- • A 230 V socket of type F, which is the standard in Europe.
Installation the toilet seat
- • Remove the cover and seat from the toilet you currently have installed.
- • See the picture below for the hardware included with the cover.
- • Hold down the side mounting bar, and align the toilet seat with the rectangular mounting plate. Push the toilet seat into the mounting plate.
.png)
Installation of the water supply hose
- • Close the water supply valve (angle spanner).
- • Thread the 4 screwed points of the inlet valve and wrap it with adhesive tape, then connect it to the water outlet of the tap and tighten.
- • Connect the filter to the inlet of the water inlet valve and wrap it, then connect it to the water inlet valve and tighten.
- • Connect the hose that allows the filtered water to pass through.
.png)
Make sure that all connections are made correctly and open the supply valve (angle spanner).
Parameters to be taken into account:
- • Rated frequency: 50-60 HZ
- • Rated power: 1300 W (when the water temperature is below 15 ℃, the heater reaches full load).
Reviews
No customer reviews for the moment.
Cover-bidet with Japanese toilet seat.
- • Water jet cleaning.
- • Temperature indicator panel.
- • Remote control and side button panel.
- • Automatic functions.
- • Compatible with different toilet models.
(Toilet not included)
FREE SHIPPING IN PENINSULA IN 24H - 48H.